Owner's Manual

ATTACHING THE ACCESSORIES

Attach the Lat Bar (47) to the High Cable (44) at

the high pulley station with a Cable Clip (50).

For some exercises, attach the Chain (not shown)

etween the Lat Bar (47) and the High Cable (44)

with two Cable Clips (50). Adjust the length of the

Chain between the Lat Bar and the High Cable

so that the Lat Bar is in the correct starting

position for the exercise to be performed.

The Lat Bar (47), the Ankle Strap (not shown), the

Handle (not shown), or the Double Strap (not

shown) can be attached at the ab station or the low

pulley station in the same way.

Hook

Slot

USING THE BURN BAND

To add resistance, attach the hook on the Burn

Band (26) to the High Anchor (C) or to the Low

Anchor (D) on the Burn Cable (45). Then, insert the

Burn Cable into the slot on the Burn Band.

When the Burn Band (26) is not in use, attach the

hook to the Top Frame (6).

See the WEIGHT RESISTANCE CHART on page

37 to view the amount of resistance added by the

burn band at each exercise station.