User's Manual

15
32. Wrap the Ab Cable (72) over a “V”-pulley (40).
Attach the “V”-pulley, a Cable Trap (49), an M10
W
asher (116), and two Full Finger Guards (43) to
the Right Upright (4) with an M10 x 61mm Bolt
(
90) and an M10 Nylon Locknut (114). M
ake sure
the Cable Trap is oriented to hold the Cable
in the groove of the Pulley.
33. Wrap the Ab Cable (72) around a “V”-pulley (40).
Attach the “V”-pulley, a Cable Trap (49), an M10
Washer (116), and two Full Finger Guards (43) to
the Left Butterfly Arm (18) with an M10 x 61mm
Bolt (90) and an M10 Nylon Locknut (114). Make
sure the Cable Trap is oriented to hold the
Cable in the groove of the Pulley.
34. Wrap the Ab Cable (72) around a “V”-pulley (40).
Attach the “V”-pulley, a Cable Trap (49), an M10
Washer (116), and two Full Finger Guards (43) to
the Right Upright (4) with an M10 x 68mm Bolt
(93) and an M10 Nylon Locknut (114).
Make sure
the Cable Trap is oriented to hold the Cable
in the groove of the Pulley.
35. Wrap the Ab Cable (72) around a “V”-pulley (40).
Attach the “V”-pulley, a Cable Trap (49), an M10
Washer (116), and two Full Finger Guards (43) to
the Right Butterfly Arm (17) with an M10 x 61mm
Bolt (90) and an M10 Nylon Locknut (114).
Make
sure the Cable Trap is oriented to hold the
Cable in the groove of the Pulley.
32
4
43
43
90
7
2
49
40
116
114
33
90
43
43
18
40
72
49
116
114
34
114
116
93
72
4
43
43
49
40
35
90
43
43
17
40
72
49
116
114