User's Manual

5
7
7
3
9
8
11
11
10
10
12
3. Attach a Tray (9) to the Tray Frame (3) with
eight M4 x 20mm Screws (7); start all eight
Screws, and then tighten them.
Next, set a Handle (8) with six Weight Plates
(10, 11, 12) on the Tray (9).
Repeat this step on the other side of the
Tray Frame (3).
4. Make sure that all parts are properly tightened before you use the dumbbells and stand. Note: Extra
hardware may be left over. Place a mat beneath the stand to protect the floor.
3
2
3
6
2
6
2. Orient the Tray Frame (3) as shown. Attach
the Tray Frame to the Uprights (2) with four
M10 x 65mm Screws (6).
See step 1. Tighten the four M10 x 65mm
Screws (6).
2