Datasheet

Datenblatt


Erstellungs-Datum December 12, 2013 11:09:04 AM CET
 Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 1
SKH D32 LP 5/16 RH2
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: [phone]
Fax: [phone]
www.weidmueller.com
General ordering data

Type SKH D32 LP 5/16 RH2
Order No. 0586761001
Version Interface, Plug-in connector, acc. to DIN 41612
female, 32D
GTIN (EAN) 4032248046270
Qty. 1 pc(s).



Plug-in card holders are used to adapt cards from the Euro
format (19") to connectors in compliance with IEC 603/
DIN 41612 and DIN 41617.
Plug-in card holders consist of the following components:
• Circuit board with standard connectors and inserts with
clamping-yoke connection.
• Flange housing and holder/pull-out mechanism for the
circuit card.
• Plug-in card and mounting foot for attaching to
mounting rail or directly to panel.
The plug-in card holders are normally used in the
following cases:
• For quick adaptation in industrial applications of
different 19" modules, and for avoiding the expense of
a 19" rack.
• When there are only a few cards to install and connect.
• The circuit board is located in a remote position where
the cabling cannot be easily handled.
• An older system needs to be updated with additional
electronics modules.
• For test devices, production processes and laboratories:
where circuit boards needs to be swapped out quickly
and connections must be easy to handle.