Datasheet

Datenblatt


Erstellungs-Datum December 17, 2013 10:16:14 AM CET
 Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 1
CP T SNT 600W 48V 12,5A
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: [phone]
Fax: [phone]
www.weidmueller.com
General ordering data

Type CP T SNT 600W 48V 12,5A
Order No. 1105870000
Version Power supply, switch-mode power supply unit
GTIN (EAN) 4032248881390
Qty. 1 pc(s).



The powerful new line of PRO-H power supplies –
with ATEX and Class I Div. 2 approvals – is designed
for use in Ex zones and the high-performance sector.
High power reserves, a wide operating temperature
range of -25 °C to +70 °C and high MTBF values (mean
time between failures) of up to 1.8 million hours: these
features ensure that the power supplies are suitable for all
applications that require superior reliability (for example
in the processing industry, power engineering, and in
demanding machine construction applications).
Solutions are available to fit control voltages from
12V/24V to 48V. The product can be wired in parallel
in order to increase the power capacity. A two-channel
set-up with 100% load sharing can also be implemented
with an optional redundancy module. This serves to
increase your operational reliability. The Remote On/
Off function allow you to switch the device on and off
remotely. The output status can be signalled over a
voltage-free relay or transistor output. The devices are
equipped with pluggable connection terminals which
allow them to be easily tested.
Product solutions can be custom-fit for use in different
types of one-phase, and three-phase systems.