Datasheet

ManualsBrandsWEIDMÜLLER ManualsPCB ConnectorsPin enclosure - PCB BL/SL 5.08 Total number of pins 6 Contact spacing: 5.08 mm 50 pc(s)

Datenblatt



Erstellungs-Datum December 17, 2013 11:03:19 AM CET

 Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 1

OMNIMATE Signal - series BL/SL 5.08

SL 5.08HC/06/90G 3.2SN OR BX

Weidmüller Interface GmbH & Co. KG

Klingenbergstraße 16

D-32758 Detmold

Germany

Fon: +49 5231 14-0

Fax: +49 5231 14-292083

www.weidmueller.com

General ordering data



Type SL 5.08HC/06/90G 3.2SN OR BX

Order No. 1147400000

Version PCB plug-in connector, male header, closed side,

Solder connection, 5.08 mm, No. of poles: 6, 90°,

Solder pin length (l): 3.2 mm, tinned, Orange, Box

GTIN (EAN) 4050118051230

Qty. 50 pc(s).

Product data IEC: 400 V / 24 A

UL: 300 V / 15 A

Packaging Box



Male headers made from glass fibre-reinforced plastic

with 90° wire outlet; optimised for wave soldering.

The flange variant (F) can be screwed onto the mating

connector or the circuit board. There is no need for an

extra screw connecting the circuit board when the solder

flange (LF) version is used. This also protects the solder

points from mechanical strain. The male headers can be

manually coded or ordered as pre-coded headers.

Summary of content (4 pages)

PAGE 1
Datenblatt OMNIMATE Signal - series BL/SL 5.08 SL 5.08HC/06/90G 3.2SN OR BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Male headers made from glass fibre-reinforced plastic with 90° wire outlet; optimised for wave soldering. The flange variant (F) can be screwed onto the mating connector or the circuit board.
PAGE 2
Datenblatt OMNIMATE Signal - series BL/SL 5.08 SL 5.08HC/06/90G 3.2SN OR BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technische Daten Dimensions and weights Net weight 3.025 g System parameters Product family Outgoing elbow Pitch in inches (P) Solder pin length (l) Can be coded Solder eyelet hole diameter (D) L1 in mm OMNIMATE Signal - series BL/SL 5.08 90° 0.2 inch 3.2 mm Yes 1.3 mm 25.
PAGE 3
Datenblatt OMNIMATE Signal - series BL/SL 5.08 SL 5.08HC/06/90G 3.2SN OR BX Technische Daten Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Notes Notes • Additional colours on request • Gold-plated contact surfaces on request • Rated current related to rated cross-section & min. No. of poles. • P on drawing = pitch • Rated data refer only to the component itself.
PAGE 4
Datenblatt OMNIMATE Signal - series BL/SL 5.08 SL 5.08HC/06/90G 3.2SN OR BX Zeichnungen Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Erstellungs-Datum December 17, 2013 11:03:19 AM CET Katalogstand xx.xx.