Data Sheet
Datenblatt
RS
RS 4AIO DP SD Z
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technische Daten
Erstellungs-Datum December 20, 2013 8:20:31 AM CET
Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 2
Dimensions and weights
Length 75 mm
Width 87 mm
Height 72 mm
Net weight 166 g
Temperatures
Operating temperature -20...+50°C
Storage temperature -40...+60 °C
General data
LED status display per channel No
Disconnection per channel No
Voltage point of measurement No
Current-measuring testpoint No
Type of test point No
LED status of the supply voltage No
Power supply fuse
3.15 A
Common pole polarity Positive or negative can be
selected using jumper
Connection data
Connection on control side SUB-D plug, in compliance
with IEC 807-2 / DIN
41652
Number of poles (control side)
15-pole plug
Connection (field side) LMNZF 5.08mm
Connection supply LMNZF 5.08mm
Wiring system
2-wire
Protective earth connection Shielding in SUB-D plug-in
connector
Ratings data
Operating voltage ≤ 25 V AC / 50 V DC
Max. current for common pole
3.15 A
Max. current per channel 0.5 A
Insulation coordination (EN50178)
According to DIN EN 50178
Rated insulation voltage < 50 V AC
Surge voltage category III
Pollution severity level 2
Pulse voltage test (1,2/50μs) 0.8 kV
Insulation test voltage 0.35 kVAC
Connection field
Type of connection Tension clamp connection
Clamping range, min. 0.13 mm²
Clamping range, max. 2.5 mm²
Solid, min. H05(07) V-U 0.5 mm²
Solid, max. H05(07) V-U 6 mm²
Flexible, min. H05(07) V-K 0.5 mm²
Flexible, max. H05(07) V-K 4 mm²
Flexible with sleeve, max. 2.5 mm²
Flexible with sleeve, min. 0.5 mm²
Sleeve with plastic collar, max. 2.5 mm²
Min. wire cross-section, AWG [field] AWG 26
Max. wire cross-section, AWG [field] AWG 12
Tightening torque, min. 0.5 Nm
Tightening torque, max.
0.6 Nm
Stripping length 6 mm