User manual

Resettingchanges
▶ To reset changes that have been made, respond to the
prompt by clicking Yes.
Resettingthecouplertofactorysettings
This function allows you to set up the web server in its origi-
nal state as at delivery. This also includes registration data
and password protection.
▶ Click on the coupler.
▶ In the Coupler Status dialogue box, click on Factory set-
tings.
Resettingthecouplertofactorysettings
▶ To confirm that you would like to reset the coupler to the
factory settings, respond to the prompt by clicking Yes.
Accessingcouplerparameters
▶ Navigate to the Coupler Status dialogue box and click
Parameters.
All the parameters are then listed in a new window.
Editingcouplerparameters
For parameters that can be edited, you can enter the
changes in the entry elds or choose alternative settings
from a dropdown menu.
10.7 Displayingmoduledataandediting
parameters
These functions are only accessible when
Force mode is not activated.
Parameters can only be written when the eld
bus is not active.
▶ Click on a module if you would like to see its properties.
A window with all status values opens.
Web server | Displaying module data and editing parameters
266 1432790000/03/02.2014Manual u-remote