User manual

7.3 Attachingthemarker
Attachingthemodulemarker
Each I/O module can be labelled at three points using the
markers. This ensures clear allocation when replacing indi-
vidual elements.
1
1
2
3
3
Three attachment points for markers
▶ Press the labelled marker into the corresponding fixture.
Attachingthemarkerforlinesandchannels
Attachingtheconnectionmarker
▶ Insert the labelled marker into the pusher for the connec-
tor.
Attachingtheswivelmarker
A swivel marker, available as an accessory (Order No.
1339920000), is best suited for making detailed markings
on the connector frame.
▶ Snap the swivel marker into place on top of the module
connector frame.
Attachingtheswivelmarker
▶ Insert the labelled marker into the swivel marker from
below.
Installation | Attaching the marker
238 1432790000/03/02.2014Manual u-remote