User manual

Web server | Updating rmware
270 1432790000/03/02.2014Manual u-remote
Forcingachannel
▶ To accept an individual change, click on Accept.
▶ To accept all changes, click OK.
Moduleswithregisters
Modules with registers (e.g. counter modules and PWM
modules) can be forced individually.
▶ Click on the module.
The Force channel window appears.
Forcingmoduleswithregisters(e.g.UR20-1CNT-100-1DO)
▶ Enter the desired value and select the desired register via
the check box
Ending/deactivatingforcedoperations
▶ To cancel a forced operation, click Cancel.
All of the changes you made will not have any effect.
▶ To end a forced operation, close the window.
▶ To deactivate Force mode, click on Deactivate Force
mode.
DeactivatingForcemode
10.10 Updatingrmware
▶ Before you can update the firmware, you must download
the latest firmware file for each coupler and each module
from the Weidmüller website to your local PC.
Firmware les have the extension .bsc. For PROFINET
couplers, for instance, the le might be named FBC-PN-IRT-
00XX.bsc.
A rmware update cannot be undone. The old
rmware in the coupler/module is overwritten.
You can determine for each individual module
as to whether an update should be carried out.
In this way, multiple modules of the same type
can run with different versions of the rmware.
Make sure that the power supply is not in-
terrupted while the rmware les are being
loaded!
▶ To carry out a firmware update, navigate to the web
server and click on Firmware.
The Firmware window opens.