User manual

ModuleStatusdialoguebox
▶ To open the datasheet for the module, click on the link
next to Designation.
▶ To change individual parameters, click Parameters.
All the parameters are then listed in a new window.
Editingmoduleparameters
For parameters which can be edited, alternative settings are
offered in a dropdown menu.
▶ Select the parameter you would like to change.
▶ Select the desired setting from the dropdown menu.
▶ To save the change, click Accept. You can now change
other parameters.
▶ To save all changes and close the window, click OK.
▶ Click on Close to close the Module Status window.
Moduleswithregisters
For modules with registers (e.g. counter modules and PWM
modules), the register settings are displayed in a tool tip.
▶ Move the cursor over the Status entry to see the register
settings.
The registers displayed in bold are activated, all of the others
are deactivated.
Displayingregistersettings
10.8 Displayingstationdata
You can use this menu to display all of the process data
and diagnostic data.
Station data menu
Displayingprocessdata
▶ Click on Station data and then on Process data.
The overview displays all modules and channels along with
their current values; these values are continuously updated.
Web server | Displaying station data
267Manual u-remote1432790000/03/02.2014