User manual

Ethernetconfiguration
Linkingabuscoupler
▶ Click on the network line in the configuration window.
▶ In the device catalogue, select the bus coupler (UR20-
FBC-PN-IRT) under PROFINET IO/Additional field
devices/ I/O /UR20 system.
▶ Double-click on the coupler or drag it to the subnet line.
The coupler is added to the subnet.
Linkingthecoupler
ProvidingthebuscouplerwithanIPaddress
All settings only take effect once they have
been loaded into the component/control unit
(see below).
▶ Double-click on the bus coupler icon.
The UR20FBC-PN-IRT properties window opens.
Buscouplerproperties
The device name must be the same as the
name that is dened in the device (see “Set-
ting the properties of the Ethernet partici-
pants”).
All settings only take effect once they have
been loaded into the component/control unit
(see below).
Commissioning| Commissioning the UR20-FBC-PN-IRT
256 1432790000/03/02.2014Manual u-remote