User manual

Selectingaprofilerail
▶ Double-click on the profile rail or drag it to the left-hand
side of the window using the mouse.
The prole rail (UR) is displayed with the open positions.
Profilerailwithopenpositions
Selectingthecontrolunitversion
▶ Click on the second line of the UR table.
▶ From the catalogue, select the control unit in use and its
version (inscription on the control unit, e.g. 317-2EK14-
etc.).
Selectingthecontrolunitversion
▶ Double-click on the respective version, or use the mouse
to drag it to the second position in the table on the left-
hand side of the window.
The Ethernet interface properties window opens.
Ethernet interface properties
▶ Enter the designated IP address and the subnet mask.
▶ Click on New.
▶ Enter a name for the subnet (e.g. Ethernet UR20-S1). This
name is assigned to the control unit.
▶ Confirm twice by clicking OK.
A network line which has the subnet name is now displayed
in the conguration window.
Commissioning | Commissioning the UR20-FBC-PN-IRT
255Manual u-remote1432790000/03/02.2014