Data Sheet
Data sheet
KSPMH (Klippon blanking plug, type MH)
KSPMH M25 SSC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date May 27, 2019 3:14:19 PM CEST
Catalogue status 23.05.2019 / We reserve the right to make technical changes. 2
Dimensions and weights
Length 21.5 mm
Length (inches)
0.846 inch
Net weight 81.9 g
Certificate numbers cable gland
Certificate no. cable gland (ATEX) SIRA 09 ATEX 1320X
Certificate no. cable gland (IECEx)
IECEx SIR 09.0131X
Certificate no. cable gland (EAC) TR RU C-
GB.ΓБ06.B.00098
General information
External thread M 25
Head diameter 30.5 mm
Impact resistance 7 J ATEX version
Length of thread 16 mm
Material
Stainless steel 1.4404
(316L)
Note: protection class • All metric sealing
plugs have a thread pitch
of 1.5 mm. • In Ex nR
applications, the KSPMH
must be fitted with a
further seal. • To obtain
the specified IP rating, the
through hole must comply
with the regulations of
EN 50262 Table 1 and
it should be possible to
secure the sealing plug
in a suitable manner. •
Operating instructions are
enclosed with each sealing
plug; these must be read
prior to installation. The
sealing plugs must be
installed according to
the specifications in the
operating instructions.
• On installation of the
KSPMH, the minimum
number of engaged thread
turns in line with the
standard EN/IEC 60079-1,
Section 5.3, must be
observed. • With NEC /
CEC applications, it must
be ensured that the inner
thread of the connection
device into which the
sealing plugs are screwed
reveals at least 8 fully
engaged thread turns. • If
KSPMH sealing plugs are
inserted into non-metallic
Ex e connection devices,
they must be connected to
the system's earth circuit.
O-Ring Silicone
O.D. 30.5 mm
Operating temperature range, max. 200 °C
Operating temperature range, min. -60 °C
Protection degree
IP66, IP68
Standards EN 60079-0 : 2009,
EN 60079-1 : 2007,
EN 60079-7 : 2007, EN
60079-31
Water depth 100 m