Datasheet
Data sheet
OMNIMATE Signal - series LS
LS2HF 3.50/14/90 3.5SN OR BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 1429-0
Fax: +49 5231 14292083
www.weidmueller.com
Technical data
Creation date October 13, 2016 11:49:43 AM CEST
Catalogue status 12.10.2016 / We reserve the right to make technical changes. 2
Dimensions and weights
Net weight 13.04 g
System parameters
Product family OMNIMATE Signal - series
LS
Wire connection method
PUSH IN
Mounting onto the PCB THT solder connection
Conductor outlet direction 90°
Pitch in mm (P) 3.5 mm
Pitch in inches (P) 0.138 inch
No. of poles 14
Fitted by customer No
Solder pin length (l) 3.5 mm
Solder pin length tolerance -0.1 / 0 mm
Solder pin dimensions 1.0 x 0.6 mm
Solder eyelet hole diameter (D) 1.3 mm
Solder eyelet hole diameter tolerance (D)+ 0,1 mm
Number of solder pins per pole 1
Screwdriver blade 0.4 x 2.5
Stripping length 8 mm
L1 in mm 24.5 mm
L1 in inches 0.966 inch
Touch-safe protection acc. to DIN VDE
0470 IP 20
Touch-safe protection acc. to DIN VDE
57 106 Safe from finger touch
Material data
Insulating material PA 66/6
Colour Orange
Colour chart (similar) RAL 2000
CTI ≥ 600
Insulation resistance
≥ 10
8
Ω
UL 94 flammability rating
V-0
Contact material Cu-Leg
Layer structure of solder connection 4-7 µm Sn matt
Storage temperature, min. -25 °C
Storage temperature, max. 55 °C
Operating temperature, min. -50 °C
Operating temperature, max. 120 °C
Temperature range, installation, min. -25 °C
Temperature range, installation, max. 100 °C
Conductors suitable for connection
Clamping range, rated connection, min. 0.2 mm²
Clamping range, rated connection, max. 1.5 mm²
Wire connection cross section AWG,
min. AWG 26
Wire connection cross section AWG,
max. AWG 16
Solid, min. H05(07) V-U 0.2 mm²
Solid, max. H05(07) V-U 1.5 mm²
Flexible, min. H05(07) V-K 0.2 mm²
Flexible, max. H05(07) V-K 1.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4,
min. 0.2 mm²
w. plastic collar ferrule, DIN 46228 pt 4,
max. 0.75 mm²
w. wire end ferrule, DIN 46228 pt 1, min
0.2 mm²
w. wire end ferrule, DIN 46228 pt 1,
max. 1.5 mm²
Rated data acc. to IEC
tested acc. to standard
IEC 60947-7-4
Rated current, min. no. of poles (Ta =
20°C) 17.5 A
Rated current, max. no. of poles (Ta =
20°C) 9 A
Rated current, min. no. of poles (Ta =
40°C) 17.5 A
Rated current, max. no. of poles (Ta =
40°C) 8 A
Rated voltage for surge voltage class /
pollution degree II/2 400 V
Rated voltage for surge voltage class /
pollution degree III/2 200 V
Rated voltage for surge voltage class /
pollution degree III/3 160 V
Rated impulse voltage for surge voltage
class/ pollution degree II/2 2.5 kV
Rated impulse voltage for surge voltage
class/ pollution degree III/2
2.5 kV
Rated impulse voltage for surge voltage
class/ contamination degree III/3 2.5 kV