Data Sheet
Data sheet
OMNIMATE Power - series WGK
VWGK 6 GY BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date May 27, 2019 2:22:03 PM CEST
Catalogue status 23.05.2019 / We reserve the right to make technical changes. 2
Dimensions and weights
Length 15.5 mm
Length (inches) 0.61 inch
Width 10 mm
Width (inches) 0.394 inch
Height 31.5 mm
Height (inches) 1.24 inch
Height of lowest version 31.5 mm
Net weight 7.1 g
System parameters
Product family OMNIMATE Power - series
WGK
Wire connection method
Screw / solder connection
Conductor outlet direction 180°
Fitted by customer No
Screwdriver blade 0.8 x 4.0
Tightening torque, min. 0.8 Nm
Tightening torque, max. 1.8 Nm
Clamping screw M 3.5
Stripping length
13 mm
Touch-safe protection acc. to DIN VDE
0470 IP 20
Material data
Insulating material Wemid (PA)
Colour grey
Colour chart (similar) RAL 7035
UL 94 flammability rating V-0
Contact material E-Cu
Contact surface tinned
Storage temperature, min. -25 °C
Storage temperature, max. 55 °C
Max. relative humidity during storage 80 %
Operating temperature, min. -50 °C
Operating temperature, max. 120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max. 120 °C
Conductors suitable for connection
Clamping range, min. 0.5 mm²
Clamping range, max. 10 mm²
Wire connection cross section AWG,
min.
AWG 22
Wire connection cross section AWG,
max.
AWG 10
Solid, min. H05(07) V-U 0.5 mm²
Solid, max. H05(07) V-U 10 mm²
Stranded, max. H07V-R 6 mm²
Flexible, min. H05(07) V-K 0.5 mm²
Flexible, max. H05(07) V-K 6 mm²
w. wire end ferrule, DIN 46228 pt 1, min0.5 mm²
w. wire end ferrule, DIN 46228 pt 1,
max.
6 mm²
Clampable conductor
Cross-section for conductor connection Type
fine-wired
nominal
2.5 mm²
AEH Stripping length nominal
12 mm
Cross-section for conductor connection Type
fine-wired
nominal
4 mm²
AEH Stripping length nominal
12 mm
Cross-section for conductor connection Type
fine-wired
nominal
6 mm²
AEH Stripping length nominal
12 mm
Cross-section for conductor connection Type
fine-wired
nominal
1.5 mm²
AEH Stripping length nominal
12 mm
Max. clamping range 10 mm²