Data Sheet
Data sheet
ACT20P
ACT20P-CI-CO
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date May 27, 2019 2:56:51 PM CEST
Catalogue status 23.05.2019 / We reserve the right to make technical changes. 2
Dimensions and weights
Width 12.5 mm
Width (inches) 0.492 inch
Height 117.2 mm
Height (inches) 4.614 inch
Depth 113.7 mm
Depth (inches) 4.476 inch
Weight 110 g
Net weight 142 g
Temperatures
Humidity 5...95 %, no condensation
Operating temperature, max. 60 °C
Operating temperature, min. -20 °C
Storage temperature, max. 85 °C
Storage temperature, min. -40 °C
Operating temperature
-20 °C...60 °C
Storage temperature -40 °C...85 °C
Environmental Product Compliance
REACH SVHC Lead 7439-92-1
Input
Number of inputs 1
Sensor supply > 17 V DC at 20 mA
Input signal 2-/3-wire transmitter,
HART signal
®
bidirectional
Input current
0...20 mA, 4…20mA
Voltage drop ≤ 1 V
Output
Number of outputs
1
Output current 0...20 mA, 4...20 mA,
HART
®
digital signal
load impedance current ≤ 550 Ω
General data
Accuracy < 0.1 % of end value
Configuration none
Current consumption ≤60 mA (24V power
supply, 20mA output)
Galvanic isolation 3-way isolator, between
input ⁄ output ⁄ supply
Rail TS 35
Step response time ≤ 0,5 ms
Temperature coefficient 80 ppm/K
Voltage supply 20…30 V DC
Insulation coordination
EMC standards EN 61010-1:2011, UL
61010-1, EN 61326-1
Galvanic isolation 3-way isolator, between
input ⁄ output ⁄ supply
Impulse withstand voltage
4 kV (1.2/50 µs)
Insulation voltage 2 kV inputs / outputs /
power supply
Pollution severity 2
Surge voltage category
III
Test voltage 300 V
Connection data
Type of connection Screw connection
Tightening torque, min. 0.4 Nm
Tightening torque, max. 0.6 Nm
Clamping range, rated connection 2.5 mm²
Clamping range, min. 0.5 mm²
Clamping range, max. 2.5 mm²
Wire connection cross section AWG,
min. AWG 30
Wire connection cross section AWG,
max. AWG 14