Document of Conformity

Ref. Certif. No.

NL-54170

IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT

(IECEE) CB SCHEME

CB TEST CERTIFICATE

Product Terminal blocks for copper conductors

Name and address of the applicant Weidmüller Interface GmbH & Co. KG

Klingenbergstrasse 16, 32758 Detmold

Germany

Name and address of the manufacturer Weidmüller Interface GmbH & Co. KG

Klingenbergstrasse 16, 32758 Detmold

Germany

Name and address of the factory

Note:

When more than one factory, please report on page 2

£ Additional information on page 2

Weidmüller Interface GmbH & Co. KG

Klingenbergstrasse 16, 32758 Detmold

Germany

Ratings and principal characteristics 500 V / 800 V, 6 kV / 8 kV, 2,5 mm², 20 A / 24 A

Trademark (if any) Weidmüller

Customer's Testing Facility (CTF) Stage used

Model / Type Ref. A2T 2.5, A2T 2.5 VL, A2T 2.5 PE, A2T 2.5 FT-PE

A2C 2.5, A3C 2.5, A4C 2.5, A2C 2.5 /DT/FS, A2C 2.5 PE/DT/FS, A2C 2.5 PE,

A3C 2.5 PE, A4C 2.5 PE

ADT 2.5 2C, ADT 2.5 3C, ADT 2.5 4C, ADT 2.5 2C W/O DTLV, ADT 2.5 3C W/O DTLV,

ADT 2.5 4C W/O DTLV

Additional information (if necessary may also be

reported on page 2)

£ Additional information on page 2

A sample of the product was tested and found

to be in conformity with

IEC 60947-7-1:2009, IEC 60947-7-2:2009

As shown in the Test Report Ref. No. which

forms part of this Certificate

2198457.50, 2198457.55

This CB Test Certificate is issued by the National Certification Body

DEKRA Certification B.V.

Meander 1051, NL-6825 MJ Arnhem, Netherlands

Date: 2019-04-09 Signature: H.R.M. Barends

page 1 of 1