Document of Conformity

ManualsBrandsWeidmueller ManualsAnalogue Signal ConditioningACT20P-CI-VO-P

00-IC-F0060-1 – Issue 15.1 This certificate may only be reproduced in its entirety and without any change, schedule included. Page 1 of 3

[1] TYPE EXAMINATION CERTIFICATE



[2] Equipment or Protective System intended for use

in Potentially Explosive Atmospheres

Directive 2014/34/EU

[3] Type Examination Certificate Number: DEMKO 18 ATEX 1861X Rev. 1

[4] Product: Analogue Signal Converter Isolator, Model ACT20P Series

[5] Manufacturer: Weidmüller Interface GmbH & Co. KG

[6] Address: Klingenbergstrasse 16, 32758 Detmold, Germany

[7] This equipment and any acceptable variation thereto is specified in the schedule to this certificate and the documents therein referred to.

[8] UL International Demko A/S certifies that this product has been found to comply with the Essential Health and Safety Requirements relating to

the design and construction of products intended for use in potentially explosive atmospheres given in Annex II to Directive 2014/34/EU of the

European Parliament and of the Council, dated 26 February 2014.

The examination and test results are recorded in confidential report no. 4788506485.4.1

[9] Compliance with the Essential Health and Safety Requirements has been assured by compliance with:

EN IEC 60079-0:2018 EN 60079-7: 2015 +A1:2018

except in respect of those requirements listed at item 18 of the Schedule.

[10] If the sign "X" is placed after the certificate number, it indicates that the product is subject to the Specific Conditions of Use specified in the

schedule to this certificate.

[11] This Type examination certificate relates only to the design of the specified product, and not to specific items of product subsequently

manufactured.

[12] The marking of the product shall include the following:

 II 3 G Ex ec IIC T5 Gc

Certification Manager

Jan-Erik Storgaard

This is to certify that the sample(s) of the Product described herein (“Certified Product”) has been investigated

and found in compliance with the Standard(s) indicated on this Certificate, in accordance with the ATEX Product

Certification Program Requirements. This certificate and test results obtained apply only to the product

sample(s) submitted by the Manufacturer. UL did not select the sample(s) or determine whether the sample(s)

provided were representative of other manufactured product. UL has not established Follow-Up Service or other

surveillance of the product. The Manufacturer is solely and fully responsible for conformity of all product to all

applicable Standards, specifications, requirements or Directives. The test results may not be used, in whole or in

part, in any other document without UL’s prior written approval.

Date of issue: 2018-12-21

Re-issued: 2019-03-29

Certification Body

UL International Demko A/S, Borupvang 5A, 2750 Ballerup, Denmark

Tel. +45 44 85 65 65, info.dk@ul.com, www.ul.com

Summary of content (3 pages)

PAGE 1
TYPE EXAMINATION CERTIFICATE [1]  Equipment or Protective System intended for use in Potentially Explosive Atmospheres Directive 2014/34/EU [2] DEMKO 18 ATEX 1861X Rev. 1 [3] Type Examination Certificate Number: [4] Product: [5] Manufacturer: Weidmüller [6] Address: [7] This equipment and any acceptable variation thereto is specified in the schedule to this certificate and the documents therein referred to.
PAGE 2
Schedule TYPE EXAMINATION CERTIFICATE No. [13] [14] [15] DEMKO 18 ATEX 1861X Rev. 1 Description of Product: These devices are considered Open-Type Analogue Signal Converter, which can connect with 2- or 3- wire transmitter or current source signal. The input and output circuits and the voltage supply are completely electrically isolated. The input signal is converted into a DC current or voltage value.
PAGE 3
Schedule TYPE EXAMINATION CERTIFICATE No. [13] [14] DEMKO 18 ATEX 1861X Rev. 1 [17] Special Conditions of Use: • The equipment shall be installed in an enclosure that provides a degree of protection not less than IP 54 in accordance with EN 60079-0. • The equipment shall only be used in an area of at least pollution degree 2, as defined in EN 60664-1.