Brochure/Catalogue
Introduction
The MCZ-SERIES signal converters have a slim terminal
design and convert, isolate and monitor analogue signals.
They have ve tension clamp connections. The open side
of the housing can be closed using a standard cover plate
accessory. The housing has a low height of just 6.3 cm.
It also accommodates a cross-connector for reducing the
wiring of multiple module‘s 24 V and 0 V connections.
Two WS10/6-markers can be used for labelling. These
are available in MultiCard format and can be printed using
Weidmüller‘s professional printing system.
Your special advantages:
Slim design
At the interface level signals are often connected to
machine-oriented or customer-specic encoders.
These should be individually adapted. The
typical terminal block design of the MCZ signal
converter allows it to be used on site instead of
the corresponding modular terminal, thus allowing
external analogue signals to be individually isolated
and processed.
Isolate and convert signals at the interface level
MCZ signal converter in terminal format
Saves space in the electrical cabinet
High product density (modules only
6 mm wide) reduces space taken on the DIN rail.
6 mm
63 mm
F.2 2729490000
Signal converters in terminal format – MCZ
F