User Documentation

Product Installation / Operation, ACT20X-HAI-SAO (HART-transparent Repeater)
62 1066540000/08/12-2018
General Specifications
Communications interface,
adapter / configuration software / FDT-DTM
device driver
CBX200 USB / "WI-Manager" / ACT20X DTM
Dimensions (H x W x D) 105.6 x 22.5 x 114.7 mm
Protection degree IP20
Screw terminal torque 0.5 Nm
Vibration IEC 60068-2-6, test Fc, 1g, 2…100 Hz
Vibration, continuous IEC 60068-2-64, test Fh, 1g, 3…100 Hz
Wire size, stranded wire AWG 26…14 / 0.13…2.08 mm²
EMC immunity influence ≤ ±0.5 % of span
Extended EMC immunity:
NAMUR NE 21, A criterion, burst
≤ ±1 % of span
Response time for cable fault < 200 ms
HART Communication
Frequency range 0.5…2.5 kHz
Signal / noise ratio min. 60 dB (0.5…10 kHz)
Response time (0…90 %, 100…10 %) < 5 ms
Default Settings
Low/high limit 3.8 mA / 20.5 mA