Approval/Certificate/Document of Conformity

(13)
SCHEDULE
(14)
to EU-Type Examination Certificate DEKRA 11ATEX0164X Issue No. 3
Page 3/3
Form 227A
Version 1 (2016-04)
(17)
Speci
fic
conditions
of
use
The HART-Transparent Driver shall be installed in a controlled environment with suitable reduced
pollution, limited to pollution degree 2 or better.
The non-intrinsically safe circuits may only be connected to an overvoltage category I or II power
source, as defined in EN 60664-1.
If the HART-Transparent Driver is installed in an explosive atmosphere where the use of
apparatus of equipment category 3 G is required, the following special condition for safe use
applies:
The HART-Transparent Driver shall be installed in an enclosure in type of protection Ex n or Ex e,
providing a degree of protection of at least IP54.
Cable entry devices and blanking elements shall fulfill the same requirements.
(18)
Essential Health and Safety Requirements
Covered by the standards listed at item (9).
(19)
Test
documentation
As listed in Test Report No. NL/DEK/ExTR11.0083/02.
(20)
Cert
i
ficate history
Issue 1 - 214594300 Initial certificate
Issue 2 - 216740400 Update to new standards
Issue 3 - 223250800 Addition of *–P models and removal of EN 60079-26.