Brochure/Catalogue

B
B.6 2729490000
Gateway for ACT20C station
• Access to all data from the devices connected to an
ACT20C station
• RJ45 port with Ethernet TCP/IP
• Configuration by means of the FDT/DTM standard
• Station management with “Plug & Produce” and “Hot
Swapping”
Technical data
Communication
Addressing
Configuration
RJ45 ports
Interface
General data
Configuration
Power consumption, max.
Voltage supply
Insulation coordination
Rated voltage ⁄ test voltage: Ethernet interface to supply ⁄ functional
earth to supply ⁄ Ethernet interface
Standards
Test voltage
Impulse withstand voltage
Pollution degree
Overvoltage category
Dimensions
Clamping range (nominal / min. / max.) mm²
Depth / Height / Width
Note
Ordering data
Note
Accessories
Note
ACT20C-GTW-100-MTCP-S
OUT
DC Supply
IN
Ethernet /
Modbus TCP
Data to
ACT20C-CMT..
ACT20C-CML..
DHCP or manual adjustment
With FDT/DTM software, DHCP
10/100BaseT(X), auto negotiation
Ethernet 10/100 Base T, Jack plug for CBX200, Communication via
CH20M rail bus with all current measuring transducers (ACT20C-
CMT-x)
With FDT/DTM software, DHCP
1.5 W
18.0 … 31.2 V DC
30 V AC RMS
IEC 61010-1, IEC 61010-2-201:2013, 1st Edition, IEC 61326-1:2012
1.1 kV
0,5 kV (1.2/50 μs)
2
II
Screw connection, RJ45 plug-in connector
1.5 / 0.5 / 2.5
113.6 / 117.2 / 22.5
Type Qty. Order No.
ACT20C-GTW-100-MTCP-S 1 1510370000
Communication signal
Supply GND
Supply +24 V DC
DIN Rail Bus CH20M
Communication L
Communication H
Ethernet / Modbus TCP
Ethernet
Supply
85 84 83 82 81
GND
+18...31.2 V DC
64
63
62
61
Power supply
Network-compatible current measuring transducers – ACT20C
ACT20C Gateway