Brochure/Catalogue
Klippon
®
Control Station – Aluminium enclosures – Klippon
®
K
Reliable stability for all applications
Klippon
®
Protect – convincing with impact-resistant aluminium enclosures
Aluminium enclosures (Klippon
®
K) can be used with a wide range of
applications and are ideally suited for the assembly of terminal blocks, switches,
power supplies, operating and display elements or electronic modules.
Available in aluminium alloy and powder coated RAL 7001. The mounting holes
are located outside the sealing area, while a corresponding thread enables
mounting rails and mounting plates to be afxed.
Material
Surface finish
Colour
IP protection class
Ambient temperature
Seal material of enclosure
Seal material of command and signalling units
Flammability rating
Impact resistance IK
Cable gland material
Cable gland clamping area
min. – max. in mm
M20
M25
Max. rated cross-section
Max. operating voltage
with integrated illuminated pushbutton or light module
Maximum operating current at 40°C ambient
temperature
1.5mm² – T6
1.5mm² – T5
2.5mm² – T6
Maximum operating current at 55°C ambient
temperature
1.5mm² – T4
1.5mm² – T5
2.5mm² – T5
Temperature class
Type of mounting
Earthing inside
Lid attachment
Lid screw torque
Earthing torque
Earthing outside
Approvals
Marking
Mounting feet
Technical data
Aluminium alloy (AL-Si12)
Powder-coated
RAL 7001
IP 54; IP 66
-55°C to 55°C
Silicone (VMQ)
EPDM
-
7 joules in acc. with IEC60079-0
4 joules in acc. with IEC60079-0
with integrated illuminated pushbutton
or light module
Nickel-plated brass
3–12 mm
10–18 mm
2.5 mm²
400 V
250 V
10 A
16 A
16 A
16 A
10 A
16 A
T4, T5, T6
Wall mounting
Earth terminal
Torx
®
20 slothead screws
2.5 Nm
2.5 Nm
M4 earthing studs, stainless steel
IECEXITA14.0013X
TUEV14ATEX7606X
MARITREG 15.40082.250
2G Ex e d IIC T* Gb
2G Ex ib d [ia] IIC T* Gb
2D Ex tb IIIC T80/100°C Db
9527590000
Aluminium
Additional features:
• Standardised enclosure with integrated
threaded holes
• Cover attachment with corrosion-resistant
Torx slothead screws
• Fastening by means of mounting feet or
internal mounting holes
• Splice-free seals for optimum ingress
protection up to IP66
C
C.120 2712630000
Enclosures