User Documentation

Klippon
®
Connect | Spring connection with PUSH IN technology
Accessories
Output options and cross-connectors to use
Supply terminal Output terminal Cross-connection Feed-in
left
Feed-in
right
ALO 6
A2C 1.5 ZQV 1.5N • •
A3C 1.5 ZQV 1.5N • •
A4C 1.5 ZQV 1.5N • •
A2C 2.5 ZQV 2.5N • •
A3C 2.5 ZQV 2.5N • •
A4C 2.5 ZQV 2.5N • •
ALO 6 and ALO 16 supply terminals
The ALO 6 and ALO 16 supply terminals can be fed by wires of cross-
section 6 or 16 mm. Over standard cross-connections the potential is
distributed over any number of terminals blocks of smaller cross-
section. Some variants for potential distribution during feed-in are
indicated in the table below, including the cross-connection which
can be used and the maximum current allowed.
Integrated into separation plate
Output options and cross-connectors to use
Supply terminal Output terminal Cross-connection Feed-in
left
Feed-in
right
ALO 16
A2C 1.5 ZQV 1.5N • •
A3C 1.5 ZQV 1.5N • •
A4C 1.5 ZQV 1.5N • •
A2C 2.5 ZQV 2.5N • •
A3C 2.5 ZQV 2.5N • •
A4C 2.5 ZQV 2.5N • •
A2C 4 ZQV 4N • •
A3C 4 ZQV 4N • •
A4C 4 ZQV 4N • •
A2C 6 ZQV 6N • •
A3C 6 ZQV 6N • •
Maximum current flow Imax only with ALO 6
Output terminal Cross-connection Wire cross-section
Feed-in
Feed-in
left or right
Feed-in
centred
A2C 1.5
ZQV 1.5N 6 mm² 41 A 41 A
A3C 1.5
ZQV 1.5N 6 mm² 41 A 41 A
A4C 1.5
ZQV 1.5N 6 mm² 41 A 41 A
A2C 2.5
ZQV 2.5N 6 mm² 41 A 41 A
A3C 2.5
ZQV 2.5N 6 mm² 41 A 41 A
A4C 2.5
ZQV 2.5N 6 mm² 41 A 41 A
Maximum current flow Imax only with ALO 16
Output terminal Cross-connection Wire cross-section
Feed-in
Feed-in
left or right
Feed-in
centred
A2C 1.5
ZQV 1.5N 16 mm² 48 A 72 A
A3C 1.5
ZQV 1.5N 16 mm² 48 A 72 A
A4C 1.5
ZQV 1.5N 16 mm² 48 A 72 A
A2C 2.5
ZQV 2.5N 16 mm² 68 A 76 A
A3C 2.5
ZQV 2.5N 16 mm² 68 A 76 A
A4C 2.5
ZQV 2.5N 16 mm² 68 A 76 A
A2C 4
ZQV 4N 16 mm² 76 A 76 A
A3C 4
ZQV 4N 16 mm² 76 A 76 A
A4C 4
ZQV 4N 16 mm² 76 A 76 A
A2C 6
ZQV 6N 16 mm² 76 A 76 A
A3C 6
ZQV 6N 16 mm² 76 A 76 A
Maximum current flow Imax only with ALO 16
Output terminal Cross-connection Wire cross-section
Feed-in
Feed-in
left or right
Feed-in
centred
A2C 1.5
ZQV 1.5N 10 mm² 40 A 40 A
A3C 1.5
ZQV 1.5N 10 mm² 40 A 40 A
A4C 1.5
ZQV 1.5N 10 mm² 40 A 40 A
A2C 2.5
ZQV 2.5N 10 mm² 40 A 40 A
A3C 2.5
ZQV 2.5N 10 mm² 40 A 40 A
A4C 2.5
ZQV 2.5N 10 mm² 40 A 40 A
A2C 4
ZQV 4N 10 mm² 40 A 40 A
A3C 4
ZQV 4N 10 mm² 40 A 40 A
A4C 4
ZQV 4N 10 mm² 40 A 40 A
A2C 6
ZQV 6N 10 mm² 40 A 40 A
A3C 6
ZQV 6N 10 mm² 40 A 40 A
Imax = Σ In (left) Imax = Σ In (left) + Σ In (right) Imax = Σ In (right)