Approval/Certificate/Document of Conformity

Page 15 of 24 Report No. 250150-TL6-1
IEC 61984
TRF No. IEC61984C
Testreport-250150-TL6-1.DOCX
VDE File No. 257500-1431-0045/250150
DEGREE OF PROTECTION TEST GROUP E (TABLE 14)
E1
PROTECTION AGAINST ELECTRIC SHOCK
Unenclosed connectors (for use inside an enclosure):
5.4 c1) COC classified as IP0X, no test required
IP00
P
6.4.2.2
5.4 c2) COC Hand back safety (IP1X or IPXXA)
50 mm sphere pressed with 20 N against mated
specimen.
No live parts accessible.
N/A
6.4.2.3
5.4 c3) COC Finger safety (IP2X or IPXXB)
Jointed test finger pressed with 20 N against mated
specimen.
No live parts accessible.
N/A
6.4.2.3
5.4 d) CBC finger safety (IP2X or IPXXB)
Jointed test finger pressed with 20 N against mated
and unmated specimen.
No live parts accessible.
N/A
Enclosed connectors (COCs and CBCs)
6.4.1
Test at mated and unmated specimen.
Jointed IEC test finger pressed with 20 N against
the surface except the mating face of the male part
of the connector. Creepages and clearances
ensured between live parts and test finger.
N/A
All parts necessary to ensure protection against
electric shock only removable with a tool.
N/A
6.4.3
For a CBC, protection against electric shock is
ensured also during insertion and withdrawal. This
is proved by use of the jointed IEC test with a test
force of 20 N. Creepages and clearances ensured
between live parts and test finger.
N/A
E2
PROVISION FOR EARTHING
7.3.13
6.5.3
Resistance between accessible metal parts and the
earthing contact ≤ 100 m ................................. :
m
N/A