Approval/Certificate/Document of Conformity

Page 12 of 24 Report No. 250150-TL6-1
IEC 61984
TRF No. IEC61984C
Testreport-250150-TL6-1.DOCX
VDE File No. 257500-1431-0045/250150
B3
MECHANICAL OPERATIONS: IEC 60512 Test 9a
7.3.9
Operating cycles ................................................ :
25
Insertion speed ................................................... :
0,01 m/s
Rest .................................................................... :
30 s
VISUAL EXAMINATION: IEC 60512 Test 1a
6.14.1
No damage occurred, which could impair normal
use
P
B4
FINAL MEASUREMENTS (CONTACT RESISTANCE): IEC 60512 Test 2b
Test current ........................................................ :
1 A
R2 1,5 R1 or R2 5 m + R1 .................... :
See appended table B4.1
P
DIELECTRIC STRENGTH: IEC 60512 Test 4a
a) Impulse withstand voltage ............................. :
--
b) r.m.s. withstand voltage ................................. :
1,39 kV
6.13
No breakdown or flashover occurred
See appended table B4.2
P
B5
BENDING (FLEXING) TEST (To be performed on new specimen)
7.3.10
Only non-rewirable connectors
Rated current ..................................................... :
A
Rated voltage ..................................................... :
V
Wire cross section .............................................. :
mm²
Load: 0,75 mm² / 20 N ; 0,75 mm² / 10 N
N
Numbers of bending ........................................... :
DURING THE TEST
No interruption of the test current
N/A
No short-circuit between the conductors
N/A
AFTER THE TEST
Cable support sleeve not loosened from the body
N/A
Insulation shows no signs of abrasion or of wear
and tear.
N/A
Broken strands do not pierce the insulation.
N/A
VISUAL EXAMINATION: IEC 60512 Test 1a