Brochure/Catalogue
OMNIMATE
®
Signal –
PCB terminals and PCB plug-in
connectors for automation and
systems engineering
equipment, as well for as
sensor-actuator interfaces and
power supplies.
OMNIMATE
®
Power –
PCB terminals, PCB plug-in
connectors and feed-through
terminals for use in power
electronics such as inverters,
frequency converters, servo
drives, heavy-duty power
supplies and motor starters.
OMNIMATE
®
Housing –
Ideally packed for industrial
electronics, for mounting on
35 mm top-hat rails (DIN rails)
inside the cabinet for
controller, signal conversion
and machine safety
applications.
OMNIMATE
®
Services –
Take advantage of our global,
free-of-charge 72-hour Sample
Service through our online
catalogue or at www.sample-
service.com. For the best
design-in processes – from the
specication stage through to
component integration.
Your ideas need the
right connections
Ours are simply brilliant
4050118 346824
Device Connectivity for power supply
You are thinking about your system’s power supply
We are thinking one step ahead
Let’s connect.
Increased automation is placing growing demands on system
technology right across the industry. The demand for more
reliable and efcient power supplies is also increasing in equal
measure. When it comes to supplying automation systems with
power it is the power supply units that form the lynchpin. They
ensure a secure power supply at the required input voltage while
providing high efciency in a compact design. The primary focus
is on regulated, switch-mode power supplies. Their eld of
application extends from construction, industrial, automation and
drive technologies right through to process control and domotics.
A wrongly dimensioned or incorrectly wired power supply unit
can quickly jeopardise the security and availability of an entire
system. This is why the choice of device connection technology
often has a major impact on operating efciency. Each individual
component needs to work as efciently and reliably as possible,
integrate exibly and be tested for reliability in everyday
operation and also have international approvals.
Products in the Weidmüller OMNIMATE series meet all the
requirements for device connection technology and offer a wide
selection of tested connection components for each application.
From OMNIMATE Signal PCB terminals and connectors for low
to medium performance classes and signals to OMNIMATE
Power PCB terminals, connectors and device feed-through
terminals for wire cross-sections up to 95 mm² used in high-
performance power supplies. All with maximum operating
reliability, of course, and the requisite specications and
approvals for international use, such as IEC, UL and CSA.
Let’s connect.
Power supply
We have the right connection solutions
1. + 2. Primary and secondary side
Small and medium
performance class
OMNIMATE PCB terminals
• LL 5.0x
• LM 5.0x
• LL 6.35…90V
• TOP1.5GS
• LMZF(L)
• LSF-SMT
• LMF 5.0x
• LP 7.xx
OMNIMATE PCB plug-in connectors
• BLZP 5.0x
• BLF 5.0x
• BLZ 7.62HP
• BLF 7.62HP
• BVFL 7.62HP
• SVFL 7.62HP
• SLF 7.62HP
Medium and high
performance class
OMNIMATE PCB terminals
• LL 6.35…90V
• LP 7.xx
• LU 10.16
• LUP 10.16 / 12.70
• LX 15.00
• LXXX 15.00
OMNIMATE PCB plug-in connectors
• BVZ 7.62IT
• SVZ 7.62HP
• BUZ 10.16IT
OMNIMATE feed-through terminals
• PGK 4
• WGK (4 mm² – 95 mm²)
3. Control output
OMNIMATE PCB terminals
• LL 5.00
• LM 3.50 / 5.0x
• LMZF(L)
• LSF-SMT 3.xx / 5.0x
OMNIMATE PCB plug-in connectors
• BCZ 3.81
• BCF 3.81
• BL 3.50
• BLZP 5.0x
• BLF 5.0x
4. Internal PCB connection
OMNIMATE PCB plug-in connectors
• BCZ 3.81
• BCF 3.81
• BLZ 3.50
• BLZF 3.50
• BLZP 5.0x
• BLF 5.0x
5. Interfaces, signal
and data ports
OMNIMATE PCB terminals
• LSF-SMT
• LSF-SMD
• LM
• PM
• PS
OMNIMATE PCB plug-in connectors
• BCZ 3.81
• BCF 3.81
• BLZ 3.50
• BLZF 3.50
• BLZP 5.0x
• BLF 5.0x
RJ45 PCB sockets
• IE-PCB-RJ45-SMD-C5-A
6. Device feed-through
OMNIMATE feed-through terminals
• PGK 4
• WGK (4 mm² – 95 mm²)
7. Electronics housings
OMNIMATE Housings
• Electronics housing CH20M
• Prole housing RS
Would you like more detailed
information?
Enter the search terms below in our online catalogue at:
http://catalog.weidmueller.com
1. Primary side
Maximum requirements fullled
Most applications in the industrial sector now use single-phase
power supplies with a wide-range input or three-phase power
supplies.
In the three-phase network, the voltage ratings range from
208 V AC to 600 V AC. Depending on device performance,
conductor cross-sections of 1.5 mm² to 50 mm² are used. The
OMNIMATE PCB terminal LXXX 15.00 is the only one on the
market to meet this maximum requirement. Common input
ranges for single-phase networks are 85 V AC to 264 V AC. To
ensure the safety of personnel and equipment during operation,
power supplies are subject to uniform safety standards and
international approvals.
The device connection technology used on the primary side
has to meet a special set of requirements. Modern device
connections such as the OMINMATE series from Weidmüller
are maintenance-free, touch-safe and available in a variety of
conductor outlet directions for different cross-sections using the
screw or spring connection system.
All the required normative provisions and international
approvals are fullled, of course, which means there is nothing
to prevent your power supply units from gaining approval on
the international market. Fixed connections of power supplies
make use of OMNIMATE PCB terminals, which are available in
pitches from 5.0x mm right up to 15.00 mm. OMNIMATE plug-
in connectors are used in applications requiring a high level of
service.
High-performance connectors and terminals for PCBs with “PUSH IN” or screw connection
Find your
connection solutions
with the AppGuide:
www.weidmueller.com/
appguide
Made in Germany
Order number: 1541640000/10/2014/SMKW
Weidmüller – Your partner in Industrial Connectivity
As experienced experts we support our customers and partners around the world
with products, solutions and services in the industrial environment of power,
signal and data. We are at home in their industries and markets and know the
technological challenges of tomorrow. We are therefore continuously developing
innovative, sustainable and useful solutions for their individual needs. Together we
set standards in Industrial Connectivity.
Your local Weidmüller partner can
be found on our website:
www.weidmueller.com/countries
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
32758 Detmold, Germany
T +49 5231 14-0
F +49 5231 14-292083
info@weidmueller.com
www.weidmueller.com