User Documentation

ManualsBrandsWeidmueller Manuals16 mm²BUF 10.16IT/02/180MSF2 AG BK BX

Assembly instructions

PUSH IN connector with push-button –

BUF 10.16

OMNIMATE Power – series BUF 10.16/180

All other technical data can be obtained from the data sheet.

Cables suitable for connection:

Strip the insulation from the cables to a length of approx. 12 mm ± 1 mm. If you are using wire-end ferrule with plastic collars,

strip the cables according to the table below.

min.

cable connection cross-section

max.

cable connection cross-section

Solid (H05(07) V-U) 2.5 mm² 10 mm²

Flexible (H05(07) V-K) 2.5 mm² 16 mm²

with wire-end ferrule according to DIN 46 228/1 2.5 mm² 16 mm²

with wire-end ferrule; with collar DIN 46 228/4 2.5 mm² 16 mm²

AWG 12 4

We recommend using the following wire-end ferrules with plastic collar:

Cable diameter Type Weidmüller color code

Order number

DIN color code

Order number

Stripping length

2.5 mm² H2,5/25 9019180000 9019180000 20 ± 1 mm

4 mm² H4,0/26 9019210000 9019210000 20 ± 1 mm

6 mm² H6,0/26 0565700000 9019230000 20 ± 1 mm

10 mm² H10,0/28 0565800000 9019250000 21 ± 1 mm

16 mm² H16/28 0566000000 9019270000 21 ± 1 mm

We recommend using the following wire-end ferrules without plastic collar:

Cable diameter Type Order number Stripping length

2.5 mm² H2,5/18 9004090000 18 ± 1 mm

4 mm² H4,0/18 9004110000 18 ± 1 mm

6 mm² H6,0/18 9004130000 18 ± 1 mm

10 mm² H10,0/18 0379300000 18 ± 1 mm

16 mm² H16,0/18 0375200000 18± 1 mm

We reserve the right to make technical changes. Personal support can be found on our website: www.weidmueller.com/contact

Summary of content (4 pages)

PAGE 1
Assembly instructions PUSH IN connector with push-button – BUF 10.16 OMNIMATE Power – series BUF 10.16/180 All other technical data can be obtained from the data sheet. Cables suitable for connection: Strip the insulation from the cables to a length of approx. 12 mm ± 1 mm. If you are using wire-end ferrule with plastic collars, strip the cables according to the table below.
PAGE 2
PUSH IN connector BUF 10.16 Retaining hook push-button (slider/pusher) conductor entry spring clamp Delivery status: • The push-buttons (slider/pusher) are engaged, the clamping units are open. Recommended tool: • Screwdriver blade 0,8 x 4,0 • Screwdriver blade standard DIN 5264 Connecting conductors: 1. Connecting conductor: Plug in the conductor into the clamping unit up to the end stop. 2. Closing clamping unit: Unlock the engaged push-button (slider/pusher) by levering the locking feature.
PAGE 3
Montageanleitung PUSH IN Steckverbinder mit Betätigungselement – BUF 10.16 OMNIMATE Power – Serie BUF 10.16/180 Alle weiteren technischen Daten sind dem Datenblatt zu entnehmen. Anschließbare Leiter: Isolieren Sie die Leitungen auf einer Länge von ca. 18 mm ±1 mm ab. Wenn Sie Aderendhülsen mit Kunststoffkragen verwenden, isolieren Sie die Leitungen gemäß unten stehender Tabelle ab.
PAGE 4
PUSH IN Steckverbinder BUF 10.16 Rasthaken Betätiger (Schieber/Pusher) Leitereinführung Klemmfeder Auslieferungszustand: • Die Betätiger (Schieber/Pusher) sind verrastet, die Klemmstellen sind geöffnet. Empfohlenes Betätigungswerkerkzeug: • Schraubendreherklinge 0,8 x 4,0 • Schraubendreherklinge Norm DIN 5264 Anschließen der Leiter: 1. Leiter anschließen: Stecken Sie den Leiter, bis zum Anschlag, in die Klemmstelle ein. 2.