User Documentation

We reserve the right to make technical changes. Personal support can be found on our website: www.weidmueller.com/contact
Connecting conductors with wire-end ferrule or solid conductors:
1. Plug in the conductor into the clamping unit up to the end stop. Make sure that the conductor is inserted up to the
end stop and ensure by gently pulling on the conductors that the clamping unit is securely engaged.
Releasing conductors:
1. To open the clamping unit press the screwdriver individually into the appropriate opening and hold the screwdriver in this position
until the spring is completely opened. Hold the screwdriver in this position and remove the conductor.
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
32758 Detmold, Germany
Phone [phone]
Fax [phone]
Email [e-mail]
Web www.weidmueller.com