User Documentation

We reserve the right to make technical changes. Personal support can be found on our website: www.weidmueller.com/contact

Cables suitable for signal connection:

Strip the insulation from the cables to a length of approx. 8 mm ± 1 mm.

If you are using wire-end ferrules strip the cables according to the table below.

min.

cable connection cross-section

max.

cable connection cross-section

Solid (H05(07) V-U) 0.14 mm² 1.5 mm²

Flexible (H05(07) V-K) 0.14 mm² 1.5 mm²

with wire-end ferrule according to DIN 46 228/1 0.25 mm² 1.5 mm²

with wire-end ferrule; with collar DIN 46 228/4 0.25 mm² 1.0 mm²

*1; *2

AWG 26 18

*1: Restriction for max. wire cross-section: crimp shape according to European standard EN 60947-1. We recommend the following crimping tools:

Crimping tool for wire-end ferrule of 0.25 mm² to 1.5 mm² with trapezoidal indentation crimp, type PZ6/5 (Order No. 9011460000)

Crimping tool for wire-end ferrule of 0.14 mm² to 0.75 mm² with trapezoidal crimp, type PZ1.5 (Order No. 9005990000)

*2: Wire cross-section 1.50 mm² possible with the following restrictions: For a rated voltage of 125V/2.5KV at III/3 or 250/2.5KV at II/2

We recommend using the following wire-end ferrules with plastic collar:

Cable diameter Type Weidmüller color code

Order number

DIN color code

Order number

Stripping length

1.50 mm² H1.5/14 0463100000 9019120000 10 ± 1 mm

1 mm² H1.0/14 0463000000 9019080000 10 ± 1 mm

0.75 mm² H0.75/14 0462900000 9019040000 10 ± 1 mm

0.50 mm² H0.5/14 0690700000 9019010000 10 ± 1 mm

0.34 mm² H0.34/12 9025770000 10 ± 1 mm

0.25 mm² H2.5/12 9025760000 10 ± 1 mm

0.14 mm² H0.14/12 9028240000 10 ± 1 mm

We recommend using the following wire-end ferrules without plastic collar:

Cable diameter Type Order number Stripping length

1.50 mm² H1.5/10 0186500000 10 ± 1 mm

1 mm² H1.0/10 0282800000 10 ± 1 mm

0.75 mm² H0.75/10 0542500000 10 ± 1 mm

0.50 mm² H0.5/10 9004050000 10 ± 1 mm