User Documentation

5
Squeeze handles to release the ratchet. The tool now opens
automatically.
1. Place cable lug or connector in the die with the appropriate
cross-section.
Note! Observe line markings on cable lug or connector!
These markings indicate the number of crimps and should
point upwards. Squeeze handles to grip cable lug or
connector. Insert the conductor.
2. Squeeze handles to release ratchet and to open the tool.
Repeat crimping procedure in accordance with the line
markings on cable lug or connector. Remove cable lug or
connector from the die.
3. Ratchet release in case of incorrect operation.
Field of application:
The tool is designed for use in applications described in the
operating instructions only. Use only cable lugs and connectors
intended for this tool and specified in DIN 46234 or DIN 46235.
Using this tool for tasks other than those described may lead to
accidents or the destruction of the tool. Subject to changes in
line with technical advances and industry standards.
Maintenance:
Subject to the frequency of use and type of service, the tool
must be checked regularly to ensure flawless functioning. In the
event that appropriate tests are not possible on site, these can
be conducted by the manufacturer.
Repairs:
The tool must only be repaired by an electro-mechanical
specialist or by the manufacturer, otherwise operator accidents
may result.
Protect yourself against live parts
Do not work on live parts.
Cover and guard live parts near your workplace.
Field of application
Use the tool only for the applications described in the operating
instructions. Do not use the tool and accessories for any work
requiring heavier-duty tools. Do not use tools for purposes or
work for which they are not intended. Using the tool for any other
purpose may cause accidents resulting in severe personal injury
or irreparable damage to the tool or items of value.
Warning!
In conjunction with some plugs and conductors
available on the market the results attained with this
tool do not conform to standards. This is due to the
tolerances permitted in the various standards and may occur
even though the conductor, plug and crimp articles used meet
the standards concerned. For this reason the tool may only be
used after its performance has been tested in conjunction with
the articles and conductors being processed and any necessary
adjustments to the tool have been made. If this tool is not tested
as required, it cannot be ruled out that faulty contacts, increased
line resistance or inadequate tensile strength may result and
adversely affect the safety of the overall device. This may cause
severe personal injury or damage to items of value. If you are
unable to conduct appropriate tests, please contact your supplier
and arrange for adjustment and testing to be performed.
General information
For your own safety, only use the accessories and attachments
recommended in the operating instructions or by the manufac-
turer. Please always carry out all the required precautionary
measures and observe all applicable accident prevention
regulations. Subject to the frequency of use and type of service,
the tool must be checked regularly to ensure flawless functioning.
If appropriate inspections are not possible at the place of use,
these may be conducted by the manufacturer. Repairs must
only be performed by qualified personnel in order to avoid
operator accidents.
en