User Documentation

110
Devices – Energy Meter 610
2008050000/03/02-2018
INFOBEREICH
Die Angabe „MatNr/Version/Datum“ bzw. „1234560000/00/MM.YY“ ist als Textvariable deniert
und kann nur auf der „Rueckseite“ editiert werden. Die Textvariable erscheint in allen Doku-
menten dieses Buches, sobald eine Synchronisierung des gesamten Buches(!) durchgeführt
wird. ACHTUNG Die „Rueckseite” muss als Formatquelle(!) ausgewählt sein!
the Energy Meter D650 and the PCs RS232 interface (Connection).
RS232-RS232 connection
• The Energy Meter 610 has an RS232 interface.
• Adapt the PCs RS232 interface (e.g. COM1) to be used as the interface.
• Baudrate;thebaudrateisthespeedatwhichthedataistobetransmittedbetweenthePC,theinterface
converter and the Energy Meter 610.
• Device address: set the set Energy Meter 610 device address.
• If no connection could be established to the Energy Meter 610, an attempt will be repeated following the
set Timeout.
• When attempting to read data from the Energy Meter 610, the number of attempted connections will be
limited by the number set under Max. no. of attempts.
• When measuring online, the ecoExplorer go will repeatedly attempt to establish a connection to the En-
ergy Meter 610.
RS232-RS485 connection
• The Energy Meter D370 has an RS485 interface.
• An interface converter from RS485 (Energy Meter 610) to RS232 (PC) is required.
• Adapt the PCs RS232 interface (e.g. COM1) to be used as the interface.
• The interface converter is also connected to this interface (e.g. COM1).
• Baudrate;thebaudrateisthespeedatwhichthedataistobetransmittedbetweenthePC,theinterface
converter and the Energy Meter D370.
• Because more than one Energy Meter 610 can be connected to the interface converter, the device ad-
dress set in the Energy Meter 610 must also be set under the connection settings.
• If no connection could be established to the Energy Meter 610, an attempt will be repeated following the
set Timeout.
• When attempting to read data from the Energy Meter 610, the number of attempted connections will be
limited by the number set under Max. no. of attempts.
• When measuring online, the ecoExplorer go will repeatedly attempt to establish a connection to the En-
ergy Meter 610.