User Documentation
128
Devices – Energy Analyser D550
2008050000/03/02-2018
INFOBEREICH
Die Angabe „MatNr/Version/Datum“ bzw. „1234560000/00/MM.YY“ ist als Textvariable deniert
und kann nur auf der „Rueckseite“ editiert werden. Die Textvariable erscheint in allen Doku-
menten dieses Buches, sobald eine Synchronisierung des gesamten Buches(!) durchgeführt
wird. ACHTUNG Die „Rueckseite” muss als Formatquelle(!) ausgewählt sein!
Time setting
• Duringconguration,theclockcanbealignedtoUTCtimeintheconnectedPC.
4.3.5.14 Time zone
All time information with regard to measurement values, events and transients relate to UTC time (Coordi-
nated Universal Time). ecoExplorer go converts UTC time to Central European Time (CET) when it displays
measurement results. Central European Time (CET) is the applicable time zone in central Europe and there-
fore also in Germany.
• Winter time - time offset from Central European
• Winter Time relative to UTC time.
• Summer time - time offset from Central European
• Summer Time relative to UTC time.
• Start of daylight saving time - start of daylight saving time.
• End of daylight saving time - end of daylight saving time.
4.3.5.15 Inputs
The Energy Analyser D550 has two digital outputs and an input used to measure temperature. Both digital
inputs can be used as digital inputs and as input pulse meters.
• A pulse value can be assigned to every pulse input.
• Various temperature sensors can be connected to the input used to measure temperature:
- PT100 - temperature range -55...+175 °C
- PT1000 - temperature range -40...+300 °C
- KTY83 - temperature range -99...+500 °C
- KTY84 - temperature range -99...+500 °C
4.3.5.16 Digital outputs
The Energy Analyser D550 has two digital outputs. Both of these digital outputs can be programmed for
event messages or as a pulse output (S0 output).
• Each digital output can be programmed as a NC or NO contact.
• One or more events can be allocated to an output if it is programmed for event updates.
• The event output activates if a selected event occurs.