User Documentation

136
Devices – Energy Analyser D550
2008050000/03/02-2018
INFOBEREICH
Die Angabe „MatNr/Version/Datum“ bzw. „1234560000/00/MM.YY“ ist als Textvariable deniert
und kann nur auf der „Rueckseite“ editiert werden. Die Textvariable erscheint in allen Doku-
menten dieses Buches, sobald eine Synchronisierung des gesamten Buches(!) durchgeführt
wird. ACHTUNG Die „Rueckseite” muss als Formatquelle(!) ausgewählt sein!
- Username: guest
- Password: tbd
- Password forgotten -
• Homepage password
- The homepage password (Modbus address 502) provides administrator rights for the device home-
page.
- The homepage password enables loading and starting Jasic programs on the device homepage.
- Password mode (Modbus address 501). The Energy Analyser D550 uses three different password
modes to access the homepage:
- 0 - The homepage password is not requested at all. (Factory default setting)
- 2-Theabilitytochangethecongurationandtodisplaymeasurementvaluesrequiresthepassword
to be entered once.
- 128-Everychangeinthecongurationrequiresthatthepasswordbeenteredagain.
- The factory default setting for the homepage password is 0.
- The homepage password has 4 digits.
- The homepage password is requested every time the homepage is opened.
- The homepage password is requested again after 5 minutes of inactivity.
- Password forgotten - Using ecoExplorer go, establish a secure connection to the device and log in as
admin.
• Display password
- Tomakeitdifcultforprogramlestobechangedaccidentallyonthedevice,theEnergyAnalyser
D550 can be programmed with a 4-digit display password (Modbus address 500).
- The factory default setting does not request a display password.
- A forgotten display password can only be deleted using ecoExplorer go together with the FTP pass-
word.
- The display password has 4 digits.
- The display password can be input directly in the Energy Analyser D550.
- Password forgotten - Using ecoExplorer go, establish a secure connection to the device and log in as
admin.
• ecoExplorer go and FTP programs
- The FTP password is required.
- TheFTPpasswordisrequiredinordertotransferlesbetweenecoExplorergoandthedevicevia
Modbus TCP.
- TheFTPpasswordisrequiredinordertotransferlesbetweenecoExplorergoandthedevicevia
Modbus RTU over Ethernet.
• Modbus TCP, Modbus RTU
- No password protection is provided for, in order to enable retrieving measurement values (Modbus ad-
dress list) using the Modbus RTU protocol.
- TheFTPpasswordisrequiredinordertotransferlesbetweenecoExplorergoandthedevicevia
Modbus TCP.