User Documentation

31
Supported operating systems – ecoExplorer go menu
2008050000/03/02-2018
INFOBEREICH
Die Angabe „MatNr/Version/Datum“ bzw. „1234560000/00/MM.YY“ ist als Textvariable deniert
und kann nur auf der „Rueckseite“ editiert werden. Die Textvariable erscheint in allen Doku-
menten dieses Buches, sobald eine Synchronisierung des gesamten Buches(!) durchgeführt
wird. ACHTUNG Die „Rueckseite” muss als Formatquelle(!) ausgewählt sein!
3.2.1.8 Project group properties
• Specicproject-relatedpropertiescanbedenedviathemenu“File/ProjectProperties”:
• Project Description
Enables the current project to be individually described.
Password
Enables assignment of an individual password or activates user management for the current project.
- Under Category, select “Password”.
- Then select the desired method to protect the project (project password or user management)
If the project is to be protected via a project password, then a password must be assigned.
• Project startup
Enables a device and connection test at the project start.
Connection test:
When a project is started, all connections of devices that are integrated in this project are tested and pre-
sented in a list.
Under Categories, select “Project’s startup “ and check the appropriate option.
Device test:
Devices can be managed by other services, which do not run in the background (e.g. ecoExplorer go
Service). In this case, the local application is no longer responsible for the device.
A device test informs you about device management when the project starts (see screenshot).
Under Categories, select “Project’s startup “ and check the appropriate option.
• Device synchronization
Enables the maximum number of simultaneously readable devices. If the device number is set too high,
this may result in system bottlenecks.
Underthecategory“Devicesynchronization“,selecttherequiredinputboxanddenethemaximum
number.
• Scheduling
Certain events can be set and planned via this category.
Schedules
Reports, for example, can be prepared at regular intervals by creating schedules to manage them.
Device read out
Toensurethatadevice’smemorydoesnot“overow”andthatthedatainthedatabaseisalwayscur-
rent, the device can be set up to be read out automatically.
Online recording
Measurement values read from ecoExplorer go can also be saved to the database (useful for devices not
equipped with their own memory).
Set time
Activating this option is recommended to facilitate comparing certain events from different measurement
locations.