User Documentation
68
Supported operating systems – Graphic programming
2008050000/03/02-2018
INFOBEREICH
Die Angabe „MatNr/Version/Datum“ bzw. „1234560000/00/MM.YY“ ist als Textvariable deniert
und kann nur auf der „Rueckseite“ editiert werden. Die Textvariable erscheint in allen Doku-
menten dieses Buches, sobald eine Synchronisierung des gesamten Buches(!) durchgeführt
wird. ACHTUNG Die „Rueckseite” muss als Formatquelle(!) ausgewählt sein!
• Transfer the program in the Jasic environment using the “Transmit to....” button.
• Select an active device and an available location in the program and end the action with “Finish”.
• Open the Overview window and select the device in the Projects window.
Selecting the program just transferred, under “Jasic information”, loads the program to ecoExplorer go and
displays it in another program window.
• Select the “Debug log” button in the program window and start the debugging information by clicking the
“Enable debug log” button.
Debug buttons
• Empty: This deletes the contents of the Debug window.
Enable debug log: The debugging information is displayed or disabled via this button.
3.4.10 Time-controlled starting of procedures
Switching on/off delay, pulse generator and slip contact
Scheduled starting of procedures
• Activation delay
A switch in accordance with the set switch on delay occurs once the scheduled delay time has expired -
which in turn changes the status. Using Start or End, additional procedures can be initiated when starting
orwhennishingaswitchingevent.Iftheinputisswitchedoffduringthedelay(T),theactivedelaywill
be deleted.
• Shutdown delay
AswitchtotheStatusandStartoutputsoccurswhenaninputeventstarts.Oncetheinputeventhasn-
ished, the set delay starts and switches the Status and End outputs on expiry of the delay period. If the
input is switched again during the delay, the active delay will be deleted and started again.
• Pulse generator
An output switch occurs when an input event starts. Once the pulse time (T1) has lapsed, a switch oc-
curs again and the preset time for the length of the pause (T2) starts. The outputs switch again once the
duration set for the pause has lapsed. The pulse activity continues for as long as the input is present.
• Slip contact
The outputs are switched when an input event starts. If there is an input event, the outputs will be
switched again once the preset time for the slip contact has lapsed.