User Documentation

71
Supported operating systems – Functions
2008050000/03/02-2018
INFOBEREICH
Die Angabe „MatNr/Version/Datum“ bzw. „1234560000/00/MM.YY“ ist als Textvariable deniert
und kann nur auf der „Rueckseite“ editiert werden. Die Textvariable erscheint in allen Doku-
menten dieses Buches, sobald eine Synchronisierung des gesamten Buches(!) durchgeführt
wird. ACHTUNG Die „Rueckseite” muss als Formatquelle(!) ausgewählt sein!
3.5.3 Conguring the database
How:
• Onselectionoftheelement“Database”intheprojectswindowand“Conguredatabase”inthepop-up
menu
Brief description:
• Enablesachangetothedatabasecongurationbyprovidingdatabasetype,address,port,username,
password and path to the database or database name.
Steps:
• Select the entry “Database” in the projects window, right click to open the pop-up menu and select “Con-
guredatabase”.
• Set the parameters according to the database system, change the settings as required and complete by
clicking the “Finish” button.
3.5.4 Optimising database
How:
• On selection of the element “Database” in the projects window and “Optimize database” in the pop-up
menu
Brief description:
• Enables optimisation of the database in order to improve its performance for example, for example.
Steps:
• Select the entry “Database” in the projects window, right clickto open the pop-up menu and select “Opti-
mize database”.
• Depending on the database system, a message either appears, stating that a database optimisation
forthedatabasesystemisnotsupportoraskingforconrmationthatanoptimisationshouldreallybe
started.
• Depending on the system and on the database, this process can take several hours to complete and will
affect the performance of your system.
• Inthesecondcase,conrmthepromptwith“Yes”ifyouwanttostarttheoptimizationimmediatelyorre-
ject it with “No” if you want to perform the optimisation later.