User Documentation

75
Supported operating systems – Functions
2008050000/03/02-2018
INFOBEREICH
Die Angabe „MatNr/Version/Datum“ bzw. „1234560000/00/MM.YY“ ist als Textvariable deniert
und kann nur auf der „Rueckseite“ editiert werden. Die Textvariable erscheint in allen Doku-
menten dieses Buches, sobald eine Synchronisierung des gesamten Buches(!) durchgeführt
wird. ACHTUNG Die „Rueckseite” muss als Formatquelle(!) ausgewählt sein!
3.5.8 Takeover device
How:
• Right-click to select a device in the projects window.
Brief description:
• Assignment of responsibility for the selected device from a service running in the background to the local
ecoExplorer go application (see “Transfer device”). After acceptance, the local ecoExplorer go application
is again responsible for the device – the background service hands over responsibiltiy for the device to
the appliation (for reading measurement data, for example).
• If the application/a service is not the device owner, it cannot use all device functionalities. All automatic
processes that also run under the ecoExplorer go service are owner-independent:
• Online data entry, automatic read-out and time synchronisation.
Steps:
• Select a device in the projects window by right-clicking it andselect “Takeover device” in the pop-up
menu.
3.5.9 Transfer device
How:
• Right-click to select a device in the projects window.
Brief description:
• Assignment of the selected device running on a background service (see “ecoExplorer go Service /
Device menu list”). After assignment, this service is again responsible for the device - the background
service hands over responsibility for the device to the application (for reading measurement data, for ex-
ample) (see “Takeover device”).
• Attention:
If the application/a service is not the device owner, it cannot use all device functionalities. All automatic
processes that also run under the ecoExplorer go service are owner-independent:
Online data entry, automatic read-out and time synchronisation. Note that you can no longer use these
functionalities, if you surrender responsibility for the device!
Steps:
• Select a device in the projects window by right-clicking it and select “Assign device” in the pop-up menu.
Readthefollowingwarningpromptandconrmit.