User Documentation

90
Supported operating systems – Functions
2008050000/03/02-2018
INFOBEREICH
Die Angabe „MatNr/Version/Datum“ bzw. „1234560000/00/MM.YY“ ist als Textvariable deniert
und kann nur auf der „Rueckseite“ editiert werden. Die Textvariable erscheint in allen Doku-
menten dieses Buches, sobald eine Synchronisierung des gesamten Buches(!) durchgeführt
wird. ACHTUNG Die „Rueckseite” muss als Formatquelle(!) ausgewählt sein!
3.5.29 Generating a report
How:
• By selecting one of the report nodes under “Reports” in the Projects window by clicking the “Execute”
button in the Report overview window.
• With a right-click on a selected report node in the projects window.
Brief description:
• Creates report with contents in accordance with selected report node.
Steps:
• Select a report class under the “Reports” node in the projects window (e.g. “Report in accordance with
DIN 50160”).
• Using the “Execute” button in the report navigation window, open the “Create a report” wizard and follow
its instructions.
• The created report will be shown in a preview window. Using the buttons in the window bar, the report
can for example be printed, saved or reviewed.
3.5.30 Generating and printing connection test report
How:
• By selecting a device group in the Projects window and selecting at least one device in the Overview
window via the “Print report” button.
• Tip: By pressing the <Ctrl> key or the <Shift> key, the mouse can be used to select more than one de-
vice at a time in the overview window for inclusion in the report.
Brief description:
• Generatesareportfortheselecteddeviceswiththemostimportantparameters(serialnumber,rmware
version, connection type, address ...).
Steps:
• Select a device group in the projects window (e.g. “By device type” group).
• Select at least one device in the overview window (menu window/overview) and perform a connection
test via the “Connection test” button in the overview window.
• Create a report with the “Print report” button.
• Completethecustomer/testerdetailsandconrmwith“OK”.
• You can print out the report by clicking the printer icon in the toolbar above the report. Select a suitable
printer and start printing with “OK”.
• Youcansavethereportbyclickingthesaveiconinthetoolbar.Denethestoragelocation,assignthe
reportanameandconrmwith“OK”.
NOTE: Without a previous successful connection test, the report will be provide you with all values. If
you come across the term “Unknown”, the connection test was either unsuccessful or nothing
was done before the report was called up. In the second case, close the report again, repeat
the connection test and regenerate the report. Values should be displayed for all devices whose
connection test was successful.