Document of Conformity

File E141197 Vol. 4 Sec. 2 Page 1 Issued: 2003-06-13

and Report

DESCRIPTION

PRODUCT COVERED:

USL, CNL Enclosed accessories for Programmable Controllers, Fieldbus

Integrators, series FBCon f/b PA or FF or Bus Terminator, may be f/b CG, may

be f/b /M12 or 7/8”, may be f/b 1way, 2way, 4way or 8way, may be f/b EX.

Note:

CNL = Canadian National Standards - Listed

USL = United States Standards - Listed

ENGINEERING CONSIDERATIONS (NOT FOR UL REPRESENTATIVE USE):

CNL - Indicates investigation to Canadian National Standards C22.2

No. 14 - 95 and No. 142-M1987.

GENERAL

These devices are fieldbus integrators, intended for use with

programmable controllers accessories.

The devices are intended for coupling of maximum four measuring devices or

sensors. The system processes and operates signals from e.g. actuators and

sensors, on one common bus. The FBCon bus terminator is a terminates the bus

signals and is always used in combination with the FBCon PA or FF Series.

The devices are suitable for field wiring.

ELECTRICAL RATINGS:

Supply via bus system 24Vdc 380mA maximum.

Enclosure type 4X indoor use only.

Ambient 60C.

Nomenclature breakdown

FBCon PA CG / M12 1 way

1) 2) 3) 4) 5)

1) FBCon =Series FBCon

2) PA =Process Automation ( with connector M12 or cable glands)

FF =Foundation Fieldbus ( with Connector 7/8")

Terminator =Bus termination Module

3) CG =Cable Gland

4) M12 =with connector M12

7/8" =with Connector 7/8"

5) 1 way =for 1 measuring unit

2 way =for 2 measuring units

3 way =for 3 measuring units

4 way =for 4 measuring units

8 way =for 8 measuring units