Document of Conformity

ManualsBrandsWeidmueller Manuals30 mHSS-HF 1.6-3.2 EL G30M

Exova Warringtonfire

Holmesfield Road

Warrington

WA1 2DS

United Kingdom

T : +44 (0 1925 655116

F : +44 (0) 1925 655419

E : warrington@exova.com

W: www.exova.com

BS EN ISO 4589-2: 1999

Determination of Burning Behaviour By Oxygen Index

A Report To: Weidmüller Interface GmbH & Co. KG

Document Reference: Additional Test Report 386711

Date: 28

July 2017

Issue No.: 1

Page 1

This report in issued in accordance with our terms and conditions, a copy of which is available on request.

Registered Office: Exova (UK) Ltd, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Reg No.SC 70429

Summary of content (8 pages)

PAGE 1
Exova Warringtonfire Holmesfield Road Warrington WA1 2DS United Kingdom T : +44 (0 1925 655116 F : +44 (0) 1925 655419 E : warrington@exova.com W: www.exova.com BS EN ISO 4589-2: 1999 Determination of Burning Behaviour By Oxygen Index Date: 28th July 2017 Issue No.: 1 A Report To: Weidmüller Interface GmbH & Co. KG Page 1 Document Reference: Additional Test Report 386711 Registered Office: Exova (UK) Ltd, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Reg No.
PAGE 2
BS EN ISO 4589-2: 1999 Executive Summary Objective To determine the oxygen index of the following product when tested in accordance with BS EN ISO 4589-2: 1999 Generic Description Product reference Thickness Density Heat shrink tubing “HSS-HF” & “HS-HF” 0.2 to 1mm 1.4g/ml³ Please see page 5 of this test report for the full description of the product tested Test Sponsor Weidmüller Interface GmbH & Co.
PAGE 3
BS EN ISO 4589-2: 1999 CONTENTS PAGE NO. EXECUTIVE SUMMARY ........................................................................................................................... 2 SIGNATORIES........................................................................................................................................... 2 TEST DETAILS ..........................................................................................................................................
PAGE 4
BS EN ISO 4589-2: 1999 Test Details Purpose of test To assess the performance of a material when it is tested in accordance with BS EN ISO 4589 - 2: 1999 "Plastics - Determination of burning behaviour by oxygen index”. The test was performed in accordance with the procedure specified in BS EN ISO 4589-2:1999 - Plastics - Determination of burning behaviour by oxygen index, and this report should be read in conjunction with that BS EN ISO Standard.
PAGE 5
BS EN ISO 4589-2: 1999 Description of Test Specimens The description of the specimens given below has been prepared from information provided by the original sponsor of the test. All values quoted are nominal, unless tolerances are given.
PAGE 6
BS EN ISO 4589-2: 1999 Test Results Applicability of test results The test results relate only to the behaviour of the specimens under the particular conditions of this test, they should not be used to infer the fire hazards of the material in other forms or under other fire conditions. The test results relate only to the specimens of the product in the form in which they were tested.
PAGE 7
BS EN ISO 4589-2: 1999 Appendix A MATERIAL TESTED Part 1 - Preliminary oxygen concentration Oxygen Concentration (%) 35.0 38.0 36.0 Burning Period (s) 32.5 177.5 >180 Length Burnt (mm) <10 >50 40 O X X Response (‘X’ or ‘O’) Part 2 - Determination of the oxygen index value NT series measurements NL series measurements (8.5) Oxygen 35.0 35.2 35.4 Concentration (%) (8.6.2) Cf 35.4 35.2 35.0 35.2 35.0 Burning Period (s) 39 57 >180 >180 >180 42 >180 47.
PAGE 8
BS EN ISO 4589-2: 1999 Revision History Issue No : Issue Date: Revised By: Approved By: Reason for Revision: Issue No : Issue Date: Revised By: Approved By: Reason for Revision: Document No.: Additional Test Report 386711 Page No.: 8 of 8 th Author: T. Mort Issue Date: 28 July 2017 Client: Weidmüller Interface GmbH & Co. KG. Issue No.