Document of Conformity

BS EN ISO 4589-2: 1999

Test Results

Applicability of test

results

The test results relate only to the behaviour of the specimens under the particular

conditions of this test, they should not be used to infer the fire hazards of the

material in other forms or under other fire conditions.

The test results relate only to the specimens of the product in the form in which

they were tested. Small differences in the composition or thickness of the

product may significantly affect the performance during the test and may

therefore invalidate the

test results. Care should be taken to ensure that any

product which is supplied or used is fully represented by the specimens which

were tested.

In accordance with Sections 8 and 9 of the Standard, the results obtained are

given in appendix A.

Conclusion

When tested in accordance with the procedure specified in BS EN ISO

4589 - 2: 1999 the material shows an oxygen index of 35.2%

Validity

The specification and interpretation of fire test methods is

the subject of

ongoing development and refinement. Changes in associated legislation may

also occur. For these reasons it is recommended that the relevance of test

reports over five years old should be considered by the user. The laboratory

that issued th

e report will be able to offer, on behalf of the legal owner, a review

of the procedures adopted for a particular test to ensure that they are

consistent with current practices, and if required may endorse the test report.

This report may only be reproduce

d in full. Extracts or abridgements shall not

be published without permission of Exova Warringtonfire.

Document No.: Additional Test Report 386711 Page No.: 6 of 8

Author: T. Mort Issue Date: 28

July 2017

Client: Weidmüller Interface GmbH &

Co. KG.

Issue No.: 1