User Documentation

2053260000/05/2015112
Installation
the PushPull signal connector a 10-pole hybrid insert. The result is a perfectly
co-ordinated system for power, signals and data, enabling consistent cabling
between the cabinet and robot (or similar applications).
Patch cordPatch Cord Patch cord
Coupling Coupling
Patch cord Patch cord
RJ45 module RJ45 module
Module tr
ansmission path
(c
hannel) with six plug-in ports
Tr
ansmission path (channel)
wi
th four plug-in ports
Weidmüller's FreeCon junction boxes provide other mounting options so that you
can always be sure of the optimum cable feed.
There are two M4-threaded ttings on the bottom side which allow the FreeCon
junction boxes to be screwed on to a oor panel. These threads are also used
to secure the mounting foot. This allows the connector to be positioned within
a 120° angle range. This allows the hose packet to be properly guided near the
robot's axis 3. It can also be mounted on the front using four M4 screws. Thus the
cable packet can be guided through e.g. a panel or a wall. An assembly opening
is needed for this.