Brochure/Catalogue

5-Port unmanaged Gigabit Ethernet PoE+ Switches
• Gigabit Ethernet at all ports
• 4x IEEE 802.3af/at conform PoE ports
• Up to 36 Watt per PoE port
• 12/24/48 V DC redundant wide-range power supply
• Support for jumbo frames
• Intelligent power consumption detection and classication
• Intelligent PoE surge voltage and short-circuit protection
Technical data
Technology
Standards IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.3af for PoE
IEEE 802.3at for PoE+
IEEE 802.3az for Energy-Efcient Ethernet
Processing Type Store and Forward
Flow Control IEEE 802.3x ow control, back pressure ow control
Switch Properties
MAC table size 8 K
Packet buffer size 1 Mbit
Jumbo Frame support 10 KB
Interface
Fibre-optic ports 100/1000BaseSFP
RJ45 Ports 10/100/1000BaseT(X) auto negotiation speed,
Full/Half duplex mode and auto MDI/MDI-X connection
DIP Switches Broadcast storm protection enable/disable
Jumbo Frame support enable/disable
IEEE 802.3az energy saving enable/disable
PoE High Power enable/disable
Switching between 100BaseSFP and 1000BaseSFP at SFP slot
Power Requirements
Input voltage 12/24/48 V DC 12 to 57 V DC), two redundant inputs
Current consumption 5.92 A at 12 VDC
5.65 A at 24 VDC
3.21 A at 48 VDC
Inrush current 17.4 A at 24 VDC (0.1 – 1 ms)
Power loss 36.4 BTU/h
Connection 2 removable 2-pole terminal blocks
Reverse polarity protection Present
Overcurrent current protection Present
PoE
PoE power budget total 62 W at 12 V DC (12-17 V DC)
120 W at 24 V DC (18-35 V DC)
144 W at 48 V DC (36 to 57 VDC)
PoE output voltage 53 V DC at 12/24/48 V DC input voltage
PoE output power
15.4 W at 802.3af, 30 W at 802.3at, 36 W in high power mode
PoE output current 350 mA at 802.3af, 600 mA at 802.3at, 720 mA in high power mode
PoE pinout Mode A: wire pair 1, 2 (V+); wire pair 3, 6 (V-)
Physical Characteristics
Housing Aluminium, IP30 protection
Dimensions (W x H x D) 29 x 135 x 105 mm (1.14 x 5.31 x 4.13 Zoll)
Weight 300 g
Installation DIN-Rail, wall (with optional mounting kit)
\ %
Environmental Limits
Operating Temperature Standard Models: 0 to 60 °C (32 to 140 °F)
Wide Temp. Models: -40 to 75 °C (-40 to 167 °F)
Storage Temperature -40 to 85 °C (-40 to 185 °F)
Ambient Relative Humidity 5 to 95 % (non-condensing)
Regulatory Approvals
Safety UL508
EMC
EN 55032/24
CISPR 32, FCC Part 15B Class A
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
MTBF (mean time between failures)
Time IE-SW-BL05-1GT-4GTPoE: 1,564,608 hrs
IE-SW-BL05-1GS-4GTPoE: 1,549,997 hrs
Database Telcordia (Bellcore), GB
Warranty
Warranty Period 5 years
Ordering data
Version Type Operating
Temperature
Order No.
1 * RJ45 10/100/1000 BaseT(X),
4 * RJ45 10/100/1000 BaseT(X) PoE+
IE-SW-BL05-1GT-4GTPoE 0 to +60 °C 1504320000
IE-SW-BL05T-1GT-4GTPoE -40 to +75 °C 1504340000
1 * 100/1000BaseSFP Slot,
4 * RJ45 10/100/1000 BaseT(X) PoE+
IE-SW-BL05-1GS-4GTPoE 0 to +60 °C 1504360000
IE-SW-BL05T-1GS-4GTPoE -40 to +75 °C 1504380000
Accessories
Type Order No.
19“ Rack Mounting Kit RM-KIT 1241440000
Wall mounting kit IE-WALLMOUNT-KIT-30MM 1504450000
105 mm
113.8 mm
29.2 mm
135 mm
1
10 / 100 / 1000M
PWR1
PWR2
PoE+
5
4
2
3
Unmanaged Switches Gigabit Ethernet - Power over Ethernet – Basic Line
Note
The IE-SW-BL05-1GS-4GTPoE supports 1x 100/1000Base SFP slot. Corresponding SFP modules for
Fast/Gigabit Ethernet, see page F.2.
B
Industrial Ethernet Switches
B.212596860000