Brochure/Catalogue

8
Cabling solution for AIDA/PROFINET
Data transmission – copper
For the transmission of data via copper cable, we recom-
mend our proven, reliable and powerful
STEADYTEC
®
technology. The simple assembly of the connectors without
the need for special tools makes wiring less time-consuming,
which in turn reduces costs. The connectors are clearly
marked and have a 4-pole design for PROFINET to prevent
the wires from being mixed up.
For use in the eld, we have enclosed these properties in
a sturdy IP67 housing, variant 14. The connector is therefore
well-protected and can even be used in the harshest of
environments.
The comprehensive FreeCon Passive connection/coupling
elements signicantly extend the application options. In
the double junction box or double coupling versions, power
(24 V / 16 A) and PROFINET/RJ45 are transmitted simulta-
neously in a single housing. This saves space and reduces
installation times. Here too, FreeCon offers the familiar
exible installation options such as the rotatable mounting
foot or the alternative fastening option via a cut-out in the
mounting plate. The anges are also tted with an arrester
strap to prevent the protective cap from being lost. The strap
is integrated in the ange gasket and does not need to be
installed separately.
PushPull data connectors for Ethernet or PROFINET
transmission, max. 8 x AWG22, Cat.6
A
IP20 RJ45: eld assembly connectors
for Ethernet or PROFINET for use in
control cabinets
FreeCon: junction box/coupling and cable coupler for PushPull
signal or PushPull data connectors. Installation options: at the
front on a mounting plate or with supplemental mounting foot.
Installation of the cable coupler: ying or with additional support
frame
FreeCon: combined double junction box/coupling for
PushPull power and PushPull data connectors,
installation options: at the front on a mounting plate
or with a mounting foot.
FreeCon active PROFINET repeater for PushPull
Var.14 connectors according to IEC 61076-3-117
with RJ45 and PushPull Power according to
PROFINET-specication.