Brochure/Catalogue

4
Cabling solution for AIDA/PROFINET
The installation concept
The installation system for the robotics cabling is compre-
hensive and complies with the PROFINET cabling guideline.
Precisely matched pluggable individual components minimi-
se installation efforts by up to 50%.
The integrated concept for the connection of power, signals
and data contains three steps: a cable packet is used to
connect the cabinet to the robot base. A hose package is
inserted between the robot base and axis 3. From there
you connect the robot head using another hose package.
This innovative installation concept allows you to drastically
reduce the amount of time required for the initial assembly.
And when it comes to servicing you will be able to replace a
defective hose package quickly and easily.
PushPull connectors enable power, signal and data lines to
be replaced in an instant. The sturdy metal housings for the
plug-in connectors are designed for use in harsh industrial
environments and guarantee maximum service life.
Hose package from the control cabinet
to the robot base
Hose package from
the robot base to axis 3
Hose package from axis 3
to the robot head
Typical cable assembly
from the control cabinet to the robot head