FreeCon Active PROFINET Media converter IE-CDM-V14MRJSCP/VAPM-C II 2588270000 Hardware Installation Guide First Edition, August 2018 Doc no. 2632650000 (00) Copyright Notice Copyright 2018 Weidmüller Interface GmbH & Co. KG All rights reserved. Reproduction without permission is prohibited.
Overview The FreeCon Active Series supports PROFINET IRT. The devices provides 18 to 30 VDC power input that can be connected simultaneously to a live DC power source.. The IP65 metal housing makes them rugged enough for any harsh industrial environment. Package Checklist Your FreeCon Active is shipped with the following items. If any of these items are missing or damaged, please contact your Weidmüller customer service for assistance.
Mounting Dimensions (unit = mm) Wall Mounting Mounting the FreeCon Active on the wall requires 4 screws. Use the FreeCon Active device as a guide to mark the correct locations of the 4 screws. We recommend M4x10mm (or longer), torque 2,5 Nm. .
Wiring Requirements WARNING Safety First! Calculate the maximum possible current in each power wire and common wire. Observe all electrical codes dictating the maximum current allowable for each wire size. If the current goes above the maximum ratings, the wiring could overheat, causing serious damage to your equipment. You should also pay attention to the following points: Use separate paths to route wiring for power and devices.
Ethernet Port Connection Use PushPull data plug: 1012170000 IE-PS-V14M-RJ45-FH-P for RJ45 port Use PushPull data plug: 1191550000 IE-PS-V14M-2SC-POF for SCRJ/POF port ATTENTION This is a Class 1 Laser/LED product. To avoid causing serious damage to your eyes, do not stare directly into the Laser Beam. LED Indicators The front panel of the Ethernet Switch contains several LED indicators. The function of each LED is described in the table below.
Quick Start Take the GSDML file and fit it in the PLC configuration (Standard procedure of PROFINET engineering) OR Access via Internet browser with default IP address 0.0.0.
Specifications Technology Standards Interface Data Ports 100BaseT, 100BaseFX POF, PROFINET IRT 100BaseT port, 100BaseFX POF (PROFINET PushPull (V14) connector) Optical Fiber Wavelength Max. TX Min.
Weidmüller gives a warranty on this product in accordance with the warranty terms as described in the general conditions of sale of the Weidmüller company which has sold the product to you. Weidmüller warrants to you that such product defects of which have already existed at the time when the risk passed will be repaired by Weidmüller free of charge or that Weidmüller will provide a new, functionally equivalent product to replace the defective one.
