User Documentation

16
6 Click on the "Set" button to apply the new settings.
7 Click on the "Scan" button again to display the values you have changed.
8 Right-click on the Repeater entry. This brings up a menu from which you can access the device web page
or the configuration page, or run the PROFINET "Wink" function.
Fig. 9 Options menu in FreeCon CFG
4.3 Using a web browser to access the device
Once the FreeCon Active PROFINET-IRT Repeater has been configured using FreeCon CFG, the web server
hosted on the Repeater can be accessed via the assigned IP address. To do this, use a web browser installed
on a PC in the same subnet. The web interface can be used to manually access the device properties
(firmware version, serial number and MAC address) or to change the settings (IP, subnet mark or gateway
addresses).