User Documentation

IE-CS(T)-2TX-xRS232/485 Initial IP Address Configuration
3-3
Telnet Console
Depending on how your computer and network are configured, you may find it convenient to use network
access to set up your IE-CS(T)-2TX-xRS232/485’s IP address. This can be done using Telnet.
ATTENTION
Figures in this chapter were generated using IE-CS-2TX-2RS232/485.
1. From the Windows desktop, click on Start and then select Run.
2. Type telnet 192.168.1.110 (use the correct IP address if different from the default) in the Open text input
box, and then click OK.
3. When the Telnet window opens, if you are prompted to input the Console password, input the password
and then press Enter.
Note that this page will only appear if the IE-CS(T)-2TX-xRS232/485 is password protected.
4. Type 2 to select Network settings, and then press Enter.